1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Lynx Aurora 16 and Midi

Discussion in 'Converters / Interfaces' started by audiokid, Mar 27, 2011.

  1. audiokid

    audiokid Staff

    How are you hooking up Midi to the Aurora converters? Is this possible for me to use it like the RME Midi?

    Example, for the FF800, I can plug a midi keyboard or controller into the midi in on the FF800 and record Midi data. Can I do this with an Aurora 16?
     
  2. TheJackAttack

    TheJackAttack Distinguished Member

    Midi is already digital information. I do not believe the Lynx has any midi ports because it is dedication to AD/DA. You would want to have a midi adapter on your computer elsewhere. An RME PCI 9632 or 9652 would do the trick since you don't like usb/midi adapters.
     
  3. audiokid

    audiokid Staff

    Check this out:

     
  4. TheJackAttack

    TheJackAttack Distinguished Member

    Problem solved! I think you need to throw Lynx and RME into a closet and the one that comes out alive the next morning is the one you choose. I don't think you can go wrong with either one. Of course if you choose MADI you might need both!
     
  5. audiokid

    audiokid Staff

    Ah, found this:

    midi is for the remote console. What is the remote console?
     
  6. TheJackAttack

    TheJackAttack Distinguished Member

    Control surface.
     
  7. audiokid

    audiokid Staff

    Thanks John!
     
  8. TheJackAttack

    TheJackAttack Distinguished Member

    Lynx Aurora Converter
     

Share This Page