1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

M-Audio Delta 410 wired into a Behringer Eurorack 24Fx Pro

Discussion in 'Recording' started by Eudor, Jun 14, 2005.

  1. Eudor

    Eudor Guest

    Plase help me connect the Delta 410 Soundcard to a behringer eurorack 24fx pro. I need to wire the mixer with the Delta 410 so that they are bridged. The Delta 410 which has 8 analog outs with +4dB or -10dB unbalanced signal levels. 2 analog ins for -10dB unbalanced.
    I am just starting out so it would be great if one experienced forumer would help out. Thanks.
     
  2. axel

    axel Guest

    i see you shifted your post,

    hi eudor, still unclear what you want to achieve, bridged??


    can you explain your set-up a bit more, keyboards, mics, etc what you want to connect, do you want to use the bus, rec out or master out to record into your comp or dat or whatever?? do you have pres for the mics, do you want to use the 410 mic ins, do you want to route all 8 outs into the mixer channels? please be more precise about your setup and what kind of gear you use and what you want to connect...

    otherwise it's difficult to help, there are many ways of hooking them up depending on your use and needs...

    axel
     

Share This Page