1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

M-powered Protools aux issues

Discussion in 'Pro Tools' started by thepilgrimsdream, Oct 15, 2010.

  1. thepilgrimsdream

    thepilgrimsdream Active Member

    So it looks like the aux outs only work in stereo pairs in the m-audio software mixer
    1&2
    3&4
    5&6
    7&8

    I wish i could have have 8 separate headphone mixes, or atleast 6 and then my main playback monitors in stereo
     
  2. TheJackAttack

    TheJackAttack Distinguished Member

    Are you talking about Protools or the interface? What interface are you using? The interface is what is going to limit your HP mixes. PT can mix as many auxiliary channels as you want.
     
  3. thepilgrimsdream

    thepilgrimsdream Active Member

    I have the m-audio profire 2626. I am using the M-audio profire mixer application that controls the interface routing on screen
     
  4. TheJackAttack

    TheJackAttack Distinguished Member

    You should make your headphone mixes in whatever DAW you use. If that is PT-M that's great. Assign that bus/aux in the DAW to one of the analog outputs of the 2626 instead of the main bus. Then you will have as many HP mixes as you have line outs. Unless you are analog summing into a mixer on those 8 stems then they are ripe for this kind of use. Avoid mixing from the 2626 gui.
     

Share This Page