1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Mono on walkman

Discussion in 'Recording' started by BigTrey, Apr 26, 2005.

  1. BigTrey

    BigTrey Active Member

    I recorded some tracks using pro tools and bounced them out to disk so that I could listen to a rough mix of what I had while I wrote some lyrics. My problem is that when I play the tracks through my monitors they sound fine (panned left/right), but when I go to play the same tracks on my discman the sound is all mono on the left speaker of the headphones. Is there a reason to this and if so could anyone guide me in making it sound like its supposed to? I bounced the tracks out in stereo but on a walkman they only play in mono. Any advice greatly appreciated. Thanks

  2. J-3

    J-3 Active Member

    do other disks play in stereo or mono on the diskman? does your "bounce disk" play in stereo or mono on other systems? find that out and you can narrow it down some. Are your headphones bunk on your diskman? Are they connected properly? I use Nuendo and when I bounce to 2 track for CD I use "stereo interleaved" 44k 16 bit. Works perfect every time. Are you doing something similar? Good Luck.

Share This Page