1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Multiple interfaes

Discussion in 'Recording' started by likea45, May 6, 2007.

  1. likea45

    likea45 Guest


    I am running Nuendo 1.5 (prefer it to later versions and its updated regularly still) with 2 Delta 1010 Units.

    I recently acquired a Firepod unit. My issue is that Nuendo currently supports the use of my PCI interfaces (Deltas) or the firepod. but only one at a time.

    Is there a way I can use both the PCI interface and the Firewire silmutaneously??


    LAVLAB Active Member

    May 7, 2007
    Boston. MA
    Home Page:
    maybe an aftermarket driver like asio4all is what you need - do a search on the web, good luck!
  3. hueseph

    hueseph Distinguished Member

    Oct 31, 2005
    Vancouver, BC, Canada
    If you can get that to work, there's a lot of people who would like to know. As far as I know however, you can only have one active asio driver at a time. which means a single input device. Either the Delta's or the Firepod.

    You can chain as many 1010's or firepods together as your computer can handle though. Can you take the firepod back and exchange it for another 1010 and maybe a preamp?
  4. likea45

    likea45 Guest

    I used to run 3 deltas but wanted to use the firepod because of its front panel ports for scratch tracks while utilizing the deltas for drum and percussion.

    I'll look up that driver someone told me about http://www.centrance.com
    makes a driver called the Universal that supposed to do this.

    I'll report back on the outcome.
  5. Appleseed

    Appleseed Guest

    take a look at my post on the DAW forum. I got something to work.

Share This Page