1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

mxl 990/991 and toneport ux2 no sound

Discussion in 'Recording' started by maton_acoustic, Feb 7, 2009.

  1. Hi, having problems with my mxl mics. The toneport works fine hooked up to my fender leccy but when i plug my mics in, i get nothing but harsh crackling sounds.
    I got them going once by disconnecting and reconnecting them and then turning phantom power off then on again but it was a one time only. Any ideas anyone?

    Regards, Dave.
  2. arthurvs

    arthurvs Guest

    I also had this problem, but once i plugged the usb cable out and in it worked again perfectly. since then i had no more problems with it.

    You could try reinstalling the software, but without a doubt, i dont think it would have any diffrence.
    I've been doing research on many forums, and it seems to be a familiar hardware problem.
    You can contact line6 customer service if nothing works out.

    i say, google some.

Share This Page