1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

My shockmount wont fit on my mic stand.

Discussion in 'Vocals' started by ColdWarmth, May 18, 2007.

  1. ColdWarmth

    ColdWarmth Guest

    Alright, I have a studio projects B1 mic, And It came with a shockmount, But the part on the shockmount that fits screws on to the stand is to small.

    http://66.201.119.52/pictures/ACFCDF.jpeg

    Also The stnad didnt come with a clip to hold a mic just for live use or Micing amps, Where can I get one that will fit on to this stand and the B1 mic?

    I know this is dumb, but please help!
     
  2. Jeremy

    Jeremy Active Member

    Sounds like you need to make a trip to a music store!
     
  3. HansAm

    HansAm Active Member

    *Are you sure there isn't a double screw in the shock mount? usually has a converter installed.
     
  4. ColdWarmth

    ColdWarmth Guest

    Ya Im sure, the One on the shockmount is like half the size than the stands.
     
  5. Cucco

    Cucco Distinguished Member

    I think HansAm is right. The adapter is screwed into the shockmount. Usually you can use a coin to get up in there and remove the smaller stud inside.
     
  6. ColdWarmth

    ColdWarmth Guest

    Ahh yes, I found it now, I just used a loonie and got it out of there, wow, didnt think it would be that easy.

    Is it alright to use a shockmount when micing amps?
     
  7. HansAm

    HansAm Active Member

    As its alright to use shock mount on whatever your doing with the mic ;)
     

Share This Page