1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

n00b needs help setting up studio!

Discussion in 'Recording' started by sbcclo, Feb 20, 2007.

  1. sbcclo

    sbcclo Guest

    Hello everyone! seems like there is alot of good advice all around this site!


    I have a mackie 1202vlz, m-audio 2496, krk rp6s, vestax mixer, and a pair of pioneer cdj 1000 mk2s. I have the L/R vestax masters connected to 1/2 on the mackie, monitors are master outs on the mackie, the outs on the sound card are on the 3/4 channel on the mackie, and i have the aux sends from the mackie going to the ins on the sound card. I think i have it connected right but no sound is going to the card according to the m-audio control panel. Ive been trying to figure it out but havent been able to come up with a solution. I know the post is a bit long but Im going crazy! if you have any idea of what going wrong, any imput would be greatly appreciated. thanks in advance! :D

Share This Page