1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Need a stand to fit on a tripod

Discussion in 'Pro Audio Equipment' started by BigBrother69, Sep 11, 2008.

  1. BigBrother69

    BigBrother69 Guest

    Hey all. I'm actually not a musician but found myself in need of a very specific music-related piece of equipment.

    I have a tripod and need a shelf-type tray to clamp on to the main rod, of the kind seen here:

    http://www.quiklok.com/catalog/?p=pr...7&sName=MS-329

    This company (quik lok) has some but none are the right size, etc.

    I'm not sure where to look for these online, and was wondering where you'd recommend or which specific products you know of that might fit the bill.

    Thanks a lot for your help!
     
  2. Thomas W. Bethel

    Thomas W. Bethel Well-Known Member

    You can make your own shelf

    Use one of these http://www.micsupply.com/standshelf.htm and add the shelf you need.

    Or this is also available http://www.traxdist.com/karaoke_accesories.htm

    http://cgi.ebay.co.uk/MIC-STAND-CLIP-ON-SHELF_W0QQitemZ320266997537QQihZ011QQcategoryZ29950QQcmdZViewItem

    There are lots of machine shops (usually called JOB shops) that would make up something like this to your specifications and charge you a reasonable amount. If it works well for your application you could start selling them to people and recover your costs. I would also look at medical supply places. Sometimes they have exactly what you need but made for medical uses. They are usually more expensive than equipment made for audio uses but if it does what you want it maybe worth the cost.
     

Share This Page