1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Need Drumagog Help!

Discussion in 'Drums' started by therecordingart, Feb 6, 2005.

  1. therecordingart

    therecordingart Well-Known Member

    Can someone help me out....I've read the manual inside out on my Alesis DMPro, Drumagog, Cubase SX, and my FW1884. What I want to do is replace my recorded kick with a kick in my Alesis. It won't work not mattter what I do. I have in to out and out to in with Midi cable between my FW1884 and the Alesis. I load up Drumagog on the insert of the recorded kick and nothing. I tinkered with the midi settings in both Drumagog and the Alesis...still nothing. It's showing on the display on my Alesis that something it happening on channel 1, but nothing comes out. Help ME!!!!!

    Also....is there a progam (hopefully free) other than Drumagog that will do this for me?
  2. pr0gr4m

    pr0gr4m Well-Known Member

    ok..so you have a Kick drum audio track. You are using that to trigger the midi function in drumagog and you are using drumagog to trigger a sound in the DMPro.

    Assuming that is correct, what midi note number are you triggering from drumagog? Make sure that the midi note you are sending corresponds to one in the DMPro for the current kit you have loaded.

    Also, and I know this may seem elementary, make sure the audio outputs of the DMPro are hooked up into something so you can hear it. You would be amazed how many times this type of situation happens.
  3. imagineaudio

    imagineaudio Active Member

Share This Page