1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Need help networking two-MOTU Miditimepieces AV USB

Discussion in 'Recording' started by mrkmiami, Mar 27, 2007.

  1. mrkmiami

    mrkmiami Guest

    Hello out there in Pro Audio land. I am trying to get two MOTU Midi Timepiece AV USBs to sync and be recognized by my MAC system as MIDI ports 1-8 (Unit A) and ports 9-16 (Unit B) I have tried following the MOTU suggestions:

    Use an Apple talk cable (which I purchased) and connnect it between units A and B. Then set Unit A as ports 1-8 and Unit B as ports 9-16.
    This is fine, but I cannot get the Midi set up in my MAC to recognize the second MIDI timepiece AV USB. If I connect each unit seperately to the MAC by USB cable it recognizes them, but for my purposes, MIDI routing and mixing and using input and output ports on the Unit B for MMC so my TASCAM DM3200 can control certain functions in Logic Pro 7.2. My system consist of:

    MAC G5 dual 2.7 gig (non intel) running OS 10.4.3 and LOGIC PRO 7.2
    Two MOTU MIDI Timepiece units. Unit A connected to MAC by USB and Unit B connected to Unit A by Apple Talk cable (din cable).

    Any help anyone can give me would be most appreciated because as of now, I am dead in the water, so to speak.

    Thanks, Mike Knox
     

Share This Page