1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Need more inputs for 002R

Discussion in 'Recording' started by rnrdawg, May 20, 2006.

  1. rnrdawg

    rnrdawg Guest

    I have a Digidesign 002R running Protools LE 6.9. I need to add 8 more XLR mic inputs/pres. Any ideas? I like the Presonus Firepod but, will it work with the 002R? What do I need?
  2. baslotto

    baslotto Active Member

    You can't have more than 18 inputs on the 002.
    4 are already there, 4 can come from another 4 channel pre (Sytek for example, http://www.sytek-audio-systems.com/products/preamps/mpx4/), another 8 can be added from an optical output pre (Mackie Onyx for example but I'm not a big fan, do your research). You have another 2 channels of S/PDIF.

  3. mud5150

    mud5150 Guest

    try posting a few more times that will probably do it.
  4. RemyRAD

    RemyRAD Well-Known Member

    rnrdawg, submitting your question for the same thing 3 times in a row is just not proper etiquette on this forum (I think the other person was just joking?). Click the onscreen button only once and then wait patiently for a moment. You will not get your answers any faster by looking like a lunefreakazoid.

    Official Recording.org freakazoid
    Ms. Remy Ann David
  5. messer

    messer Guest

    Hi there, I also have a 002R and Tools 6.9.2. I run a Behringer 8 channel A/ D & D/A converter. Works great. Cost me $400 AUS

  6. swprophet

    swprophet Guest

    yep yep

    i use the digimax LT by presonus / good quality pre's at a reasonable price. i think right now they are between 500-600 dollars. They use lightpipe and have worked well for me thus far.

Share This Page