1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Need some help rackmounting a few items

Discussion in 'Pro Audio Equipment' started by numrologst, Oct 22, 2005.

  1. numrologst

    numrologst Guest

    Groove tubes brick. Cant figure out how to put it into a rack

    Also how to add an lcd monitor to a rack unit
  2. stickers

    stickers Active Member

    Jan 31, 2005
    Lowell MA
    Home Page:
    i have 2 im not going to mount them but..
    you could try to find long enough screws and mount them on the bottom of the case. drill holes on the base of the case aligned with the screws attaching the rubber feet to the brick. remove screws from rubber feet. use longer screws through the base of the case into the holes where the rubber feet screws were. I would keep the rubber feet on for vibration absorbtion. not sure if this will work but im guessing it will if the so called longer screws had the same threading as the screws which were used to keep the rubber feet on.
  3. AudioGaff

    AudioGaff Distinguished Member

    Feb 23, 2001
    Silicon Valley
    I'd start by getting a utility rack shelf. Then see if any of the pre-drilled holes line up to the feet of the Brick or mabe even faster with industrial velcro. It is heavy enough that you might need anyting that a shelf to set it on.
  4. MilesAway

    MilesAway Guest

    Rack-shelf + Zip-ties. Simple, effective & non-destructive.

Share This Page