1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Nero upgrade=now won't recognize CDRW

Discussion in 'Recording' started by Kemble, May 27, 2003.

  1. Kemble

    Kemble Guest

    I upgraded my version of Nero to the latest version- 5.5.10.28. I'm using a USB HP 8200e burner. Had no problems ever with recognition of this device. Now, it won't even list it in Nero as an option.
    Anyone with similar or a solution?

    Thanks.

    Jeff
     
  2. Opus2000

    Opus2000 Well-Known Member

    You may need to run an ASAPI updater...
    This can be found on many sites...one I know of is on the steinberg ftp site under the wavelab downloads..under the CD Recorder updater section...

    Try it and it should work

    Opus :D
     
  3. Kemble

    Kemble Guest

    nope.
    no dice.

    I'm thinkin I'll uninstall and go back to the 5.5.5.1 version.

    ...upgrades are overrated.... :mad:

    any other ideas?
    I ran the nero info utility and it won't even recognize it. Well, actually, it recognized that there was something there at "G:" but didn't read/get any info from it. Explorer reads it fine.

    JZ
     
  4. Kemble

    Kemble Guest

    Solution found.
    Here:http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x73144b3ef09fd611abdb0090277a778c,00.html

    The DLL file that comes with upgrades doesn't work with HP stuff. you have to update your WNASPI32.dll manually to a compatible XP version.

    I have it if anyone ever needs it.

    Not that anyone would admit to also using an HP burner...let alone an 8200e that is soooooo slooooowwwwwwwww.

    JZ
     

Share This Page