1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Neumann TLM 103d

Discussion in 'Microphones' started by audiokid, Mar 3, 2010.

  1. audiokid

    audiokid Chris Staff Resource Member

    Mar 20, 2000
    Prince George, BC
    Home Page:
    Wow, I had no idea until I saw this clip. Neumann TLM 103d ... add a starter kit (ad da converter, limiter and compressor) and spdif or AES into your DAW. I didn't hear him talk about a mic pre? Is this all combined into the mic?
    I didn't realize there was a bottleneck that happened with analog/mics that was anything to be concerned about?

    Here I thought this would never happen in the pro audio mic world and see this was released two years ago. Anyone try this and what is this mic's main use?

  2. TheJackAttack

    TheJackAttack Moderator Resource Member

    Mar 20, 2008
    currently Billings
    Correct. No pre needed. You do need AES/EBU or SPDif on your interface though to get it into the DAW. For your equipment chain Chris, I doubt there are any bottlenecks like the vid mentioned. I haven't used on myself but have of course used the standard version quite a bit.

Share This Page