1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Neunendo using 2 drivers

Discussion in 'Recording' started by sirchick, Sep 19, 2007.

  1. sirchick

    sirchick Active Member


    I recently have bought a audio card for recording but I can't connect it to my 5.1 speakers as its a stereo card. So what im aiming to do is find a way so that the input is my new audio card and the output is the card built into my pc already... with out me having to keep switching between drivers. is there a way to get 2 different drivers to work together?

    I would buy stereo monitors and not worry about it but i don't have any more money left to get them so im trying to trick the program into using 2 drivers simultaneously for input and output..

    any one know how ?
  2. dementedchord

    dementedchord Well-Known Member

    i'm assuming that the card in question is a soundblather??? they dont seem to play well with others and are really made for gamers.... that being said i've heard of people haveing good(?) results with the drivers from asio4all... good luck...
  3. sirchick

    sirchick Active Member

    Yeh but i also have a delta1010lt.

    But the program Neuendo does not allow me to have output drivers different to input so i have to keep changing from delta for recording and sound blaster for output so it gets tedious. Was hoping some one knew a clever way to get it set up in the program so that it would work.
  4. fourone3

    fourone3 Active Member

    I don't think you can have two drivers in Nuendo, but I could be wrong. If you're a registered user from Steinberg, call them and see what they say.
  5. AudioGaff

    AudioGaff Well-Known Member

    Steinberg Cubase & Nuendo = one driver at a time. If you have an audio interface and driver that supports multiple cards, then you get all the I/O that driver is capable of.

    Some host DAW software when using milticlient drivers, will allow you to choose which specific interface and driver is used for input and output. Some even let you use both WDM and ASIO at the same time.

Share This Page