1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Neve 33609 power Q

Discussion in 'Pro Audio Equipment' started by Jeff Hayat, Oct 9, 2013.

  1. Jeff Hayat

    Jeff Hayat Active Member

    I have an original 33609/C on the way. It's coming from the UK to me (USA). Most likely, the voltage selector switch will be at 220 (or 240?); I will set that to 120.

    The question I have is in regards to the fuses - the main fuse and the secondary. Do I need to change either of those?

    Thanks in advance.
  2. Boswell

    Boswell Moderator Distinguished Member

    Check the instructions in the operator's manual.

    The mains voltage selector has the primary fuse in the centre. After you change the voltage selector to suit your local supply, change the primary fuse to the type and rating shown on the plate below the mains input connector. You should not have to change the secondary fuse.
  3. Jeff Hayat

    Jeff Hayat Active Member

    Thanks for the reply.

    I am buying this second hand; no manual.

    I have it figured out, however. It arrived earlier today. On the back, it says:

    T500mA: 200-240

    And that explains it.


Share This Page