1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Neve Console please help

Discussion in 'Recording' started by billsnodgrass, Feb 13, 2004.

  1. billsnodgrass

    billsnodgrass Active Member

    I'm starting a project on tuesday the 17 feb
    using a neve vr 72 input console and have a stupid question! Can I split the signal by going insert out to one source and coming off the fader (direct out) or a bus to another source. Stupid question I know but in these modern times..............
  2. Chance

    Chance Guest

    All Neve insert sends are HOT all the time.
    I'm not sure of your plan, but you can also send signal to your small fader
  3. bhuvan

    bhuvan Active Member

    if by this i could also understand that you want to make copies of the signal, then you could assign that channel to groups.
    you could then take the group outs from the patch-bay to where-ever or you could hit the group button on a channel strip to get that group number coming on that strip.

    tell me if it works!

Share This Page