1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

NEW APOGEE X-HD OPTION CARD FIRMWARE

Discussion in 'Converters / Interfaces' started by Alécio Costa - Brazil, Aug 16, 2007.

  1. Alécio Costa - Brazil

    Alécio Costa - Brazil Well-Known Member

    NEW APOGEE X-HD OPTION CARD FIRMWARE FEATURES
    BETTER INTEGRATION WITH PRO TOOLS HD


    FOR IMMEDIATE RELEASE

    Santa Monica, CA, August 9th 2007 -Today, Apogee
    Electronics Corporation released an update to
    their X-HD option card to provide better
    integration with Pro Tools HD.

    The X-HD v.2 option allows for direct
    connectivity between Pro Tools HD systems and
    Apogee's AD-16X, DA-16X, and Rosetta 800 and 200
    series converters, providing superior quality
    conversion to Pro Tools HD users without the need
    for an additional interface.

    The X-HD v.2 release changes Apogee hardware
    emulation in Pro Tools to better support I/O
    setup and auto delay compensation without
    compromising channel counts or converter
    configurations.

    For more information, please see the Apogee website here:

    Apogee Electronics: Downloads: X-HD Card



    The Apogee Electronics Support Team


    __________________
    Andrew Mittelman
    Sound Generation
    http://www.soundgeneration.net


    X-HD firmware v.2.0 adds the following features:

    • All Apogee interfaces are now detected as 192 Digital interfaces (as opposed to 192 interfaces), to ensure phase coherency across all outputs when Pro Tools Delay Compensation is enabled.

    • When an AD16X and DA16X are set to Advanced Routing and connected to the same Digidesign PCI card, it’s now possible to configure Pro Tools I/O inserts with the AD/DA’s analog and digital I/O. This is made possible by changes within the X-HD card that route the AD’s analog inputs and the DA’s analog outputs to the first 16 Pro Tools channels (A1-16) and the DA’s digital inputs and AD’s digital outputs to Pro Tools channels 17-32 (B1-16).

    • Latency correction values are now entered in the I/O Setup window, for simpler and more effective compatibility with Pro Tools Delay Compensation.

    • The X-HD User’s Guide has been re-written to improved clarity and included new functionality

    For more information go to: http://www.apogeedigital.com/downloa...?show=xhd_card
    __________________
     

Share This Page