1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

New PC components

Discussion in 'Pro Audio Equipment' started by Tmando, Jan 12, 2005.

  1. Tmando

    Tmando Guest

    I'm building a new PC to use with a PT 002 Rack setup. Any suggestions on a choice of motherboard, processor, hard drives, ect.?
    Thanks!
     
  2. heyman

    heyman Guest

    Stay away from SIS chipsets on the motherboard.. Intel chipsets are fine. You should really check out Didgidesign's Compatibility website for recommended PC's.... under their support / Compatibiltity area of their website.
     
  3. Massive Mastering

    Massive Mastering Well-Known Member

    Plextor PlexWriter Premium CD-R drives... There is no substitute.
     
  4. Nemesys

    Nemesys Guest

    If this isn't digressing the thread too much, I'm wondering which contributes more to the error rate, the compact disc itself, or the writer?

    I'd be guessing the CD-Writer is more critical.... So hypothetically, if it was strictly an either/or choice between using better CD's such as Mitsui Silvers or Taiyoko Yudens or whatever... versus getting a Plextor CD writer.... I'm reckoning the wiser money would be to buy the Plextor???
     
  5. frob

    frob Well-Known Member

    you will also want a DVD -/+ R drive as well there getting preatie cheap and cubace3 only comes on DVD also 2 raptor drives running 10k rpm for recording and maxtor with 8Mb buffer for the main drive but if you go to the DAW forum you will find all kinds of sujestions.
     
  6. Massive Mastering

    Massive Mastering Well-Known Member

    Nemesys - It's a combination, to a point... The drive is the "most" important part, but matching it to good media is obvioulsy critical.

    The way I look at it, a great drive can make crappy discs with crappy media. But a crappy drive will make crappy discs with ANY media.
     

Share This Page