1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

New studio setup opinion

Discussion in 'Pro Audio Equipment' started by mixerofsound, Mar 17, 2006.

  1. mixerofsound

    mixerofsound Guest

    Hey everyone,

    I'm moving my studio into a new house, this great place in van nuys, Ca w/ arched ceiling..and a walk in closet im going to convert into a vocal booth.

    I'm a hip hop producer....but not exclusively.
    I'm mixin some new flava together..

    (a) I have an opportunity to buy a Mackie 32-8 mixer for DIRT Cheap, 900 bucks perfect condition, just serviced.

    I've got a tascam fw-1884 that i do my $*^t on, and ive always wanted to be able to breakout my outs to more than just the two mains.

    (b) I saw this RME Octa Pre (8 channel ad/converter w/ built in mic pres)
    I was just wondering if you've heard about it...is the quailty different because they have these mic pre's built in, rather than a strict ad/da converter...

    do you think its worth the 2 grand which it will end up being, to be able to bust out 16 outs to this mackie...for my mixes? If im going to do it is it worth it on this mackie?

    I want to get a UAD1 card too so then I can fatten up the 2-bus too w/ their precision limiter.
    Would i be better off just geting a UAD-1, and doing everything in the box?

    The most im going to record is an old vintage ludwig kit, vocals, and guitar but individually....or 2 at a time...and also, how are RME mic pre's? I was thinking about building my own mock-neves from a wbsite i found online with all the parts for 1/4 of the price.

    If you're still wit me, thanks !!!! Would love your opinion...

    -jon
     
  2. saemskin

    saemskin Active Member

    you dont need the mixer, buy a nice mic pre for the 900, your tascam has enough io for what you are using it for. i.e. not alot of live instruments if any, correct?
    I dont understand why you want to run the 1884 outs into a mixer when every DAW on the market has a mixer in it.
     
  3. therecordingart

    therecordingart Well-Known Member

    The only way I could possible justify getting a mixer would be if you were getting a high end console to mix out of the box.

    There are lots of people out there that will have their tracks recorded into PT and mix out of the box through an SSL, Trident, Neve...etc.

    A Mackie won't provide what is it that these fellas use their high end consoles for. The are doing it for a few reasons:

    -Add the consoles sonic signature to their digital tracks
    -Use the plethora of outboard that they have
    -Some still like the feel of the oldin' days of twisting knobs
    -etc etc so on and so forth

    Altough you can use the Mackie for the last two....It will fall very short in the adding on sonic signature department. Although Mackie gear is very usable, it is debated that good sounds going into a Mackie come out sounding like a stale donut.

    Hold on to the FW1884(which has 8 1/4 inch outputs not 2) and get a few outboard pres or some quality compressors or EQ. Sht, buy some really nice mics.
     
  4. therecordingart

    therecordingart Well-Known Member

    If you are doing hip hop.....your clients are going to want to see 3 things otherwise they'll think you suck.....

    -Po' Toos
    -Avalon pres (reffered to as Avalons)
    -Nice pop screens (they like pop screens more than mics for some reason) If you don't believe me...put up a mic without pop screen.

    Hahaha....there isn't a day that passes that I don't get a call saying:

    "Yo man you gots some Po' Toos..what about Avalons cuz that shitz dope B...Snoop uses Po' Toos and Avalons."
     
  5. saemskin

    saemskin Active Member

    dont forget the obligatory MPC and Triton.
    Unnecessary hip hop standards :D
     
  6. RemyRAD

    RemyRAD Well-Known Member

    Make sure the studio has some sympathizers also.

    Motown kid
    Ms. Remy Ann David
     

Share This Page