1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Newbie, wtih hardware recording help

Discussion in 'Recording' started by fineartdigital, Dec 13, 2009.

  1. fineartdigital

    fineartdigital Active Member

    I am not using a computer to do/learn voice recording.
    I have an AT 2020 Mic and shock mount. Sterling PF1 pop filter. A mackie 402-vlz3 mixer and a Marantz PMD661 recorder.

    I can edit the result in soundbooth cs4 , but I am trying to get the initial setup as good as possible.

    I live in Providence road island if there is anyone willing to come by and help me for $$$ for about 2 hours.

    Or can you direct me to reading info on using this type of gear?

    Thank you in advance

    Brian
     
  2. TheJackAttack

    TheJackAttack Distinguished Member

    Why are you even using the Mackie for this? Go straight into the PMD661. Adjust the input control so that the loudest your voice shows on the meter is about 2/3's of the scale. Go to it. If you want to improve the signal chain then send it to Doug Oade for modification.
     
  3. fineartdigital

    fineartdigital Active Member

    Im using the mackie to for the voice eq and music line in. I want to edit onthe pc as little as possible, so the hi / low eq's on the mixer help
     

Share This Page