1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

no phase reverse switch on my mixer sugestions plz

Discussion in 'Recording' started by bluesdudeo, Dec 24, 2005.

  1. bluesdudeo

    bluesdudeo Active Member

    hi ,
    this is a follow on the mid side recording question. I have no mid side button on my behringer mixer are there any alternatives ? I have a splitter in my patch bay rack and so it's just the reverse phase to deal ... would it work if I rewire a cable wrong for 1 side of the stereo image ?

    merry xmas and thanks for your time again
     
  2. Falken

    Falken Active Member

  3. bluesdudeo

    bluesdudeo Active Member

    thanks

    again thanks .. I will give it a shot.
     
  4. RemyRAD

    RemyRAD Guest

    All you have to do is record the 2 tracks into your computer, just the way they are. If you have your mono track and your side track already in your computer, you do not need to screw around with hardware phase reversers! You simply take your side channel and duplicate it. Then you invert the phase of the duplicate. Pan one side to the left, pan the other side to the right. Take your mono mid track and pan to center! Just make sure you are listening to the proper left right perspective and if it is backwards, reverse the side channels. To adjust the stereo width, just increase or decrease the Mono track. You now have a completely mono compatible when collapsed from stereo track.

    Your software may even have presets for MS decoding already in the program! Most do.

    My favorite way to record stereo!!

    Remy Ann "MS" David
    (and yes I not only do MS, I have MS!)
     
  5. RemyRAD

    RemyRAD Guest

    Now if you want to accomplish this in a live setting?? You will need 2 devices. 1 is an XLR "Y" cord, 1 female to 2 males. Then you will need an XLR phase reverse in-line adapter. Plug your middle " mono" microphone into input 1. Then take your side microphone and plug it in two inputs 2 and 3. Take 2 and pan that left. Take 3 and pan that right. If the stereo image appears backwards reverse inputs 2 and 3. Stereo wideness can be adjusted by increasing or decreasing channel 1, you're mono source.

    The purists will argue that by splitting a microphone into 2 inputs you will be loading down the microphones impedence. Boo hoo, regardless, it works great, sounds great, what you don't know won't hurt you.

    If you don't like to do that, do it from the output from your inserts but then you'll need transformers for both in that becomes a real cluster *!:?><*&% so don't bother with that.

    Miss Mary Source
     
  6. bluesdudeo

    bluesdudeo Active Member

    THANKS xxx
     

Share This Page