1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

noisy pre amps on mini-me?

Discussion in 'Pro Audio Equipment' started by John Stafford, Oct 1, 2004.

  1. John Stafford

    John Stafford Well-Known Member

    Oct 1, 2004
    Hello everyone. This is my first post, but I've learned so much from you people over the last few weeks, so thanks!

    I've seen a couple of posts elsewhere about the Apogee Mini-Me where users complained that their pre-amps are a little on the noisey side. Would users here agree that this is the case?

    From my own experience, I know it's possible (when not using something properly) to get the wrong impression, so I'd like to clear this up before I buy one.

    Many thanks,
    John Stafford
  2. Massive Mastering

    Massive Mastering Distinguished Member

    Jul 18, 2004
    Chicago area, IL, USA
    Home Page:
    Never had a noise problem with mine. Can't give you a measurement on it, though...

    Oh, and welcome to the board. :cool:
  3. John Stafford

    John Stafford Well-Known Member

    Oct 1, 2004
    Hi John,
    Thanks for your reply!

    Glad to hear that you have had no noise problems with your mini-me. I haven't come across any other references to noise in the Mini-Me other than the posts I mentioned from the other forum.

    All I have to do now is save up the money!

    John Stafford
  4. igloo

    igloo Guest

    Hi John--

    I've got the Mini-Me, and the preamps have a clean yet punchy sound. I wouldn't call them noisy.

    The only application that might pass as noisy is with the Soft Limit Compressor on the 3rd curve. Which is a brick wall limiter that brings out background noise the same way any hard limiter does.

    first and second curves are more of a safety net to avoid digital overide.

    I own a Mini-Me and I'm very happy with it. Good luck,


Share This Page