1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

'Not Responding' Whenever I save

Discussion in 'Computing' started by stratman312, Jun 14, 2010.

  1. stratman312

    stratman312 Active Member

    I just get my ADK computer in, and it seemed to be working ok, but when I began recording my projects, every time I save, Sonar stops responding and it kicks me out even when only running a few plugins and nothing else. I have literally only had the computer for like a week and it is pretty much the same as when I bought it, except I install Quantum Leap Symphonic and a few effects plugins. I'm running sonar 8.5 producer 64 bit, Presonus Firebox, Windows 7, 6 GB ram, and I have the OS on a separate hard drive than the audio files and projects. I've alreadly looked through the threads on optimizing Windows usage and most of it was already the way my computer was set up.
     
  2. audiokid

    audiokid Staff

    Just tossing into the wind here until someone with more experience chimes in. I wonder if there is a driver issue? Make sure you have the 64 bit driver installed.
     
  3. stratman312

    stratman312 Active Member

    I'm pretty sure the drivers are fine. Everything else is working fine, and it actually is doing the same thing now in 32 bit. I'm hardly using any of the computer power, not to mention it has an i7 with 6 GB of ram.
     

Share This Page