1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

onyx 400F - HELP!

Discussion in 'Recording' started by cotenyc, Mar 3, 2007.

  1. cotenyc

    cotenyc Active Member

    hey all,
    I took the plunge and bought an onyx 400f and I'm having problems!

    The firewire is fine, great connection, sound perfect outside of my DAW world, but as soon as I launch Sonar 6.2 its all downhill.

    Here's the deal, I've been using an audigy2 card for sometime, set at 16bit and 48000 samples.. no problems.
    Now with this unit, everything is complete static.
    I've tried opening the console and changing the sample rate to 44.1. It seems as though it only works when the project I'm working on is done at 24/96.
    But none of my projects are recorded at that spec so nothing is working right.
    Help!?
     

Share This Page