1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Opening an Audio Techinica AT2020

Discussion in 'Vocals' started by yzfwv, Aug 18, 2006.

  1. yzfwv

    yzfwv Guest

    Some one mentioned something about opening up an at2020 and removing the foam from the element. How do you open it up and reseal it. Also, does any one have and pictures?
     
  2. moonbaby

    moonbaby Mmmmmm Well-Known Member

    I don't have a 2020, but I do have several AT mics. Some of them open up by unscrewing the top half from the bottom half. I don't know about yours, but you want to look for a "seal"...a line that looks like a joining place for the 2 halves. Anyway, A-T has a real good tech support team up there in Ohio. Go on their website and ask them about this. Remember that this "mod" will void your warranty, which is probably moot in that A-T gear rarely breaks down in the first place.
     
  3. ezride251

    ezride251 Guest

    I recently bought an AT 2020 and would be interested in your success with this mod. How simple was the process and what was the sonic result. Thanks

    EZ
     

Share This Page