1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.


Discussion in 'Pro Audio Equipment' started by Squaysh, May 6, 2004.

  1. Squaysh

    Squaysh Guest

    PFL and AFL

    Will someone please tell me what these exactly represent and give an example? It would be much appreciated. Thank you.
  2. Kurt Foster

    Kurt Foster Distinguished Member

    Jul 2, 2002
    77 Sunset Lane.
    These are both functions of your soloing system, meant to allow you to listen to one channel while not forcing you to chage the mix in any way or interupting any routing. In solo you can "solo" a track and hear it in a non desructive manner, keeping the session moving.

    PFL stands for pre fade listen, usually a solo of the mic pre amp before the EQ stage. Any adjustments made to the faders or the EQs will not be heard when your are in PFL. PFL is most useful for setting levels of the mic preamp.

    AFL is after fade listen. This allows you to hear changes in EQ and fader levels. AFL allows you to solo a channel (or channels) to make level changes on the faders and adjustments on the EQ.
  3. Squaysh

    Squaysh Guest

    fantastic. thank you.
  4. nuclearmoon

    nuclearmoon Guest

    Yeah, thanks, Kurt. It's damn handy to know (now) why the manual sez to set levels in PFL!

Share This Page