1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Phantom for TAC Scorpion

Discussion in 'Pro Audio Equipment' started by Roger Tausz, Mar 20, 2015.

  1. Roger Tausz

    Roger Tausz Active Member

    I am using a TAC Scorpion 24x16 and phantom power went south. it's not the fuse (damn it).
    dose anyone have any insights as to where i might look or whom i might talk to?

    thanks
    peace & love
    roger
     
  2. Boswell

    Boswell Moderator Distinguished Member

    Have you checked the 48V out of the power supply? I don't know the inside of those units, but I know the 48V is generated as one of the voltage rails in the PSU, and they are cabled into the main chassis.

    Depending on how confident you are about debugging hardware, it could well be possible to loosen the housing on the power connector and slide the cover back down the cable, exposing the pins. From there, you could go round the connector pins taking voltage measurements using the +ve probe your multimeter with the -ve on the PSU chassis.
     
  3. Roger Tausz

    Roger Tausz Active Member

    thanks. will try.
     

Share This Page