1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

please hellp

Discussion in 'Recording' started by stil, Jul 31, 2008.

  1. stil

    stil Guest

    I have ALTO 100amx mixer and i don't know how to connect it with my sound card (emu0404).
     
  2. GeckoMusic

    GeckoMusic Guest

    I have to admit the manual doesn't tell you exactly what to connect where, but you should be able to figure it out after reading it.
    AMX-140 manual

    How it is connected depends on what sound interface you have, and what you want to do with it.
     
  3. Greener

    Greener Guest

    Two cables needed. Both 1/4' to RCA.

    Connected to the Tape out RCA plugs L/R on your mixer into the 1/4' L/R Analogue inputs on your card.

    You can also do it with 1/4' patch cables. From the line outs or Aux sends.

    Seriously, read the manuals... Do you have to hold someones hand when you cross the road or can you look for yourself?
     
  4. Space

    Space Well-Known Member

    unless he/she has the USB version
     
  5. stil

    stil Guest

    i read it,but i don't understand. Please tell me how i connect mixer with sound card. I and my friend try to connect but we don't know.
     
  6. Greener

    Greener Guest

    Do you have any cables?
     
  7. Space

    Space Well-Known Member

  8. stil

    stil Guest

    I have some cables.... :roll: Can u write me what cable to use( price is don't mater) and please tell me how to connect this mixer with sound card (I gona creazy),I am realy disapointed :(...
     
  9. stil

    stil Guest

    I forgot to tell u.I want to record my vocals.
     
  10. Greener

    Greener Guest

    I said this before. On this page.

    "Two cables needed. Both 1/4' to RCA.

    Connected to the Tape out RCA plugs L/R on your mixer into the 1/4' L/R Analogue inputs on your card. "

    You could use a stereo RCA cable, and two RCA to 1/4' TRS connectors... You need to connect the RCA TAPE OUT on your mixer to the 1/4' ANALOGUE LINE IN of your card.

    Phone a friend maybe?
     
  11. Davedog

    Davedog Distinguished Member

    Potted meat......don u thin lucy?
     
  12. bent

    bent No Bad Vibes! Well-Known Member

    Proof that studios will make a comeback, if you ask me...
     
  13. JoeH

    JoeH Well-Known Member

    almost painful to read.....
     
  14. :lol:

    stil, spend some money and get a usb or firewire interface for your computer. Most likely, your sound card will not handle the recording you're trying to do, so you should get a computer interface. I'm assuming you don't want to spend much money, and I'm guessing your computer may not have firewire :roll: so look into a USB interface.

    Or, even easier, if you're just looking to record vocals, get a Snowball USB mic by Blue.
     
  15. hueseph

    hueseph Well-Known Member

    He has an Emu0404. Whether it's USB or PCI he didn't say but it should be good enough for unbalanced I/O to the mixer.

    Reading the manual should reveal this: output from one to input on the other. Do you need to know more than that?
     
  16. Codemonkey

    Codemonkey Well-Known Member

    Soon, everything will be colour coded and we can forget about this.

    That said, people have no idea how to wire the back of a computer. Literally, it's all made to fit. You plug cable of colour X into jack of colour X but people get it wrong.

    Brains are as important as gain structure.
    Some people have neither.
     

Share This Page