1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Please help! Problem with Superior Drummer 2.0 + Reaper

Discussion in 'Reaper' started by venndi, Feb 9, 2014.

  1. venndi

    venndi Active Member

    I Have a problem with mixing in SD2.0. In mixer panel, when I set the EQ, filter, compression...by the BUS panels, but It's nothing change by the voice.
    I see some tutorials on yuotube, I make so the whole thing.
    In reaper right click, insert virtual instrument on new track, and select on SD2. In reaper by all track (except the first), I select on record output (stereo).
    In SD2, by output, I've select on multichanel, and that's it. Everything works fine except mixing by the bus panel, can somebody help me?
     
  2. DonnyThompson

    DonnyThompson Distinguished Member

    I think that perhaps the reason no one has answered you question yet is because I'm not sure that anyone really understands what you are asking... I certainly mean no offense by this, I think we just have a translation problem.

    Are you saying that you are having problems adding compression, EQ and filters to the track in Reaper where SD is assigned? I'm not quite sure I understand what you are saying when you say "bus panel"....
     
  3. venndi

    venndi Active Member

    Sorry if my question can not be understood.
    I make some picture, than I think It's will be understandable.
    1.
    Untitled1.jpg

    Here by first picture, when I add some EQ or something else, than works fine, but here by the second picture (by the BUS panel), when I add some EQ,filter,compression, Nothing changes:

    Untitled2.jpg

    I think It is not "connected" somehow, with the outputs on the first picture, becouse when I by the second picture on the BUS panels, click on the solo button, than will be muted, instead of solo voice.

    First picture: Untitled1_www.kepfeltoltes.hu_.png
    Second: Untitled2_www.kepfeltoltes.hu_.png
     
  4. DonnyThompson

    DonnyThompson Distinguished Member

    It's difficult to see in the pictures, they are low resolution ...and my eyes aren't the greatest to begin with...

    In the second picture, are you sure you even have anything assigned to those tracks/channels you are trying to process? They look "greyed out", as if they are "dead" tracks or unassigned...

    I really am trying to help you here...
     
  5. venndi

    venndi Active Member

    Check the pictures in high resolution, I've uploaded...in my previous post.
     

Share This Page