1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Portable Phantom Power

Discussion in 'Pro Audio Equipment' started by MicHead, Jan 29, 2008.

  1. MicHead

    MicHead Active Member

    Hi,

    Does anyone have a design for a phantom supply (48vdc), that is battery or wall supply powered? I would like to get the output as close as possible to 48vdc at 2-10ma. I understand this could be done with an appropriate voltage doubler circuit. Any info would help. Thanks much!

    MicHead
     
  2. bent

    bent No Bad Vibes! Well-Known Member

  3. MicHead

    MicHead Active Member

    HI,

    Thanks much for the reply. I am aware of the battery/portable phantom supplies available. Some are quite nice. Spec's aside I am aiming for a custom supply, easily modifiable, with the ability to change the unit packaging for specific applications. I also desire the ability to alter the output voltage to accomodate different operating activities/mic equipment. Thanks for your interest though. Stay well.

    MicHead
     

Share This Page