1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Power Supply?

Discussion in 'Recording' started by alstonblues, Jul 26, 2009.

  1. alstonblues

    alstonblues Guest

    hey everyone its me again

    does anyone know where i can (or send me the link) where i can find the power supply (chord) for the behringer eurorack mx 802A mixer?


    I really need this chord so that i can power my mixer

    thanks guys :)
     
  2. TheJackAttack

    TheJackAttack Distinguished Member

    email Uli.
     
  3. alstonblues

    alstonblues Guest

    ummm who is that?
     
  4. Space

    Space Well-Known Member

    I hear that search engines are still producing valid results...worth a shot?
     
  5. djmukilteo

    djmukilteo Well-Known Member

    you mean the power "cord" that plugs into the back of the mixer?
    If so it looks like an XLR jack to me....not a very standard or common approach to power supply connections....

    link removed
     
  6. alstonblues

    alstonblues Guest

  7. TheJackAttack

    TheJackAttack Distinguished Member

    It's not an XLR jack. It is a round multi pin jack.

    Of course the linked power wart is for a different device altogether and unless you know the pin and voltage and mA specs it isn't a good idea to just go mixin' the juice.

    GF:
    http://www.behringer.com/EN/Learn-More/BEHRINGER/Uli-Behringer.aspx
     
  8. djmukilteo

    djmukilteo Well-Known Member

    Sorry my mistake....hard to tell....looked like an XLR....so is it a 3 pin DIN?
    either way it's still a specific factory connector non-standard power supply connection and I would think the only way to replace it would be to go back to the factory and order a replacement...I was also thinking Ebay might have one....
     
  9. TheJackAttack

    TheJackAttack Distinguished Member

    I can't remember whether it's 3 pin or 4 pin. I haven't touched Uli's gear since 2002.
     
  10. Space

    Space Well-Known Member

    What you require is an MXUL2 adapter for the eurothing that was purchased in America/Canada.


    Not specifically a V-Amp adapter.
     

Share This Page