1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Presonus Firestudio 26x26 BNC or ADAT snyc?

Discussion in 'Recording' started by jammster, Jan 10, 2011.

  1. jammster

    jammster Active Member

    I have the firestudio 26x26 and the Digimax FS. I recently got the digimax fs and have been encountering some sync errors by using only the ADAT sync.

    The firestudio manual does not recommend to connect BNC to the Digimax, why? It seems like a better connection so I did it now and it seems to sync better.

    Does anyone have any words of wisdom to share about the best way to get the two to work?

    Thanks for your time,
    Bret Norman
  2. jammster

    jammster Active Member


    As you can see I use this with all four ADAT cables attached for 88.2/96k operation. The BNC sync just seems to be a better way to provide a solid sync signal. Does anyone have any thoughts?
  3. jammster

    jammster Active Member

    Alright, now I feel like an idiot! Did a goole search and the second result:

    Connecting two Digimax FS to a Firestudio - PreSonus Forums

    I hope this thread can help others whom have a similar question.

    At any rate, a word clock generator would be another idea, but from what I gather the Presonus firestudio has a very decent one already onboard.

    Cheers all!

Share This Page