1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

PreSonus firestudio Clips Lights On

Discussion in 'Pro Audio Equipment' started by edaub1, May 17, 2010.

  1. edaub1

    edaub1 Active Member

    I own a presonus firestudio project. Have had it for about 2 years..
    When i turn the unit on..the clip lights are maxed out for channels 1 and sometimes 2. It plays a high pitch beep when it turns on too...

    Any ideas whats wrong?
     
  2. hueseph

    hueseph Well-Known Member

    How are you connected. A diagram or a detailed description would be good. Ins to outs etc.
     
  3. edaub1

    edaub1 Active Member

    Well i might have solved it... i unplugged the firewire cable...then powered it on and it seems to be working...but if it happens again ill post all of that
     
  4. TheJackAttack

    TheJackAttack Distinguished Member

    Are you using the power adapter AND a firewire bus that is passing power? This can cause a little confusion in the interface since it will not reboot itself until both are unplugged from power.
     

Share This Page