1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Pro Tools 9 Interface Problem

Discussion in 'Pro Tools' started by mrb1946, Jan 11, 2011.

  1. mrb1946

    mrb1946 Active Member

    I recently installed Pro Tools 9 on my Mac. I've been using Logic 9, but felt the need to give Pro Tools a shot. My interface is an E-MU 0404 USB and I've never had any problems with it in Logic. When I was setting up PT, I went to the Hardware Setup page and under "Peripherals" my E-MU was not there. Only "Pro Tools Aggregate I/O." I went to E-MU's website and reinstalled the drivers, but that did not help. Is there anything anyone can suggest?

    Thanks
     
  2. mrb1946

    mrb1946 Active Member

    I solved my problem. This post can be deleted. I simply opened the "Playback Engine" page and selected "E-MU 0404 USB." Thank you
     
  3. audiokid

    audiokid Staff

    Good to hear and thank you for posting the answer. Note: we do not normally delete posts or threads. You have added both a question and an answer that will help others to do with Pro Tools 9 and your interface.

    The U.S. Small Business Administration | SBA.gov

    Cheers!
     

Share This Page