1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Problem with a Mackie 32:8

Discussion in 'Recording' started by MrKat, Apr 20, 2011.

  1. MrKat

    MrKat Active Member

    Dec 29, 2010
    Hi guys,

    I have 2 channels on my mackie that are way too loud compared to others at the same level.

    I have swapped cables with channels that are good and still have the same problem...

    I have also checked that the whole channel is as it should be, just like the others. Even moving the fader up and down just increases and decreases the volume, but at a higher volume than that of the other tracks.

    Faulty fader?
  2. TheJackAttack

    TheJackAttack Moderator Resource Member

    Mar 20, 2008
    currently Billings
    If the fader moving adjusts the volume from nothing increasing all the way to the top, it probably isn't the fader. It might be the input gain at the top of the stick. Remy might have a better idea.
  3. Link555

    Link555 Distinguished Member

    Mar 31, 2007
    North Vancouver
    I am guessing The feedback in the input gain section is open, does the trim pot at the top of the strip work?

Share This Page