1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Programming Drums.

Discussion in 'Drums' started by SickOfTalk, Feb 28, 2011.

  1. SickOfTalk

    SickOfTalk Member

    Hi Just joined in the hope to further my knowledge.

    Im currently using Logic Pro to record and produce tracks. But im fairly in the dark as to how i can produce a drum track without micing up a kit. so i would like to know what i need to program drums for a particular track that im recording. is there a plugin for logic? or do i need a completely separate program?

    Thanks in advance,

    P.S Apologies for the extremely rookie question..
  2. natural

    natural Active Member

    If you're in Logic 8 read chapters 25 & 29. that should get you started.
    Otherwise look up Ultrabeat and EXS24. That's what's in Logic.
    Alternatively, you can purchase any number of Drum Plugins. (do a search here in R.O. for more info already discussed)
  3. nicholaspaul

    nicholaspaul Active Member

    Many synths will have sounds on them that are simulating/sampled drums. Use a keyboard and quantize the track. If your'e not a drummer, make sure you listen to other drummer a lot to get an idea and feel for how your track should sound (less is often more!). I like to have separate tracks for kick, snare, hi-hat and cymbals. Or just play a musical sounding pattern. But quantization is your friend for sure :)
  4. Michael Hodecker

    Michael Hodecker Active Member

    Redrum in Reason is excellent, especially for Electronica and Hip Hop. Battery 3 has some really good quality replications
  5. dave_p

    dave_p Active Member

    assuming you are pretty much going from scratch...

    here is what works for me and its fairly quick to get a drum track up.

    get a good vst kit/sample set or use what you have on hand and put it on a midi channel

    open a midi editor and by hand lay out a 4 bar drum measure that has the basic beat of the part you are working on. drop all the kick, hat, snare etc in there until it sounds happening. cut and past that 3 more times. change a little something in each 4 bar section. glue that together. do a little humanization on the quantize. now you will have a 32 bar drum section/loop. cut and paste those and add fills or change ups at the end of each 16-32 bar section.

    do your intros, bridges or breakdowns in a similar fashion. you can have a fairly natural sounding track pretty fast.
Similar Threads
  1. sioux
  2. drunkfux
  3. BigTrey
  4. musiclover1966
  5. BigTrey

Share This Page