1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Projectmix I/O vs. Tascam FW 1884

Discussion in 'Recording' started by scatman, Mar 12, 2006.

  1. scatman

    scatman Guest

    If anybody can help me here I would really appreciate it.

    I am going to be using Digital Performer 4.6 software and was wondering if anyone out there has used either one of these with DP.

    I know they are both supposed to work with it, but I had heard that the projectmix couldn't control effects settings in DP but could in others...
    I didn't know if this was a problem anyone else has had or not.
     
  2. chrispick

    chrispick Guest

    I use the Tascam FW-1804 with DP 4.61 in my project studio. It's essentially the same box as the FW-1884 without the transport controls. And it works great.

    For what it's worth.

    I hear other people have positive experiences with the 1884.
     
  3. gotlerTech

    gotlerTech Guest

    FW-1804

    I had to struggle a bit with the 1804, but I like it. It sounds warm, not digital.

    It behaves more like pro audio gear than a computer interface, so it's a little more difficult to work with than something like a Presonus Firebox.

    Here's a short sample (280kB):

    http://
     

Share This Page