1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

PROTOOLS LE/Cubase SX3

Discussion in 'Cubase' started by smoove, Sep 22, 2005.

  1. smoove

    smoove Guest

    Hello,

    I was wondering, is there any difference in sound quality between protools le and cubase sx3.......i know that an individual should chose a software that he or she is comfortable with, but im curious to know if the digi 002 firewire is any different from an onyx firewire setup..........isnt the sound quality the same?????

    I also want to say that the guys on this site make recording and troubleshooting a whole lot easier.........keep it up guys.
     
  2. iznogood

    iznogood Member

    i would say they sound different.... simply because they are different....

    but how they sound and what sounds best is a matter of taste....
     
  3. shanabit

    shanabit Active Member

    The difference would be mostly in the I/O your using in this case.
    ProTools LE through a DIGI 002 RACK sounds THE SAME as SX running through the DIGI 002 using the CORE AUDIO driver

    When I run SX through my MOTU828MKii, the same tracks sound just slightly different. More clear high mids noted. Not anything major BTW. I use both systems and the diff is MINIMAL. If you used an RME FW 800, then I would think the sound would be better on that system just because the converters and clock are better on that unit. Both SX and LE sound good.
     
  4. miks

    miks Guest

    i believe you are CORRECT shanabit. Im speaking of course from experience. Had digi 002r with PT and now have RME FF800 with cubase sx3.

    The sound quality is better to me and the midi capabilities far out weigh pro tools. Cubase is such a good program. I recommend it highly.
     
  5. smoove

    smoove Guest

    thanks fellas
     

Share This Page