1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Protools montoring effects

Discussion in 'Pro Tools' started by mercurix, Nov 4, 2006.

  1. mercurix

    mercurix Active Member

    Feb 21, 2006
    Hey, quick question. How do I set up a track so that my singer's listening to some reverb and compression on his vocals, but none is getting recorded in protools? I know i can do this without having to record 2 tracks at a time.
  2. sheet

    sheet Well-Known Member

    May 28, 2003
    Kansas City, KS
    Home Page:
    Holy cow you guys. Read the manuals.

    I am assuming that you have an LE system.

    Effects do not get recorded, unless you return them to an aux track and enable record on that track.

    Set up an aux send on your channel, assign that to the appropriate output on your interface. Insert a plug on your channel and he will hear it. Your other option is to set up an aux channel like I told you before, and run an aux on that channel.

    You are going to have latency, depending on the plugs used, it could be great, it could be small. So you might have to nudge your vocal tracks back, because he is hearing them late.
  3. mercurix

    mercurix Active Member

    Feb 21, 2006

    ok, so juest set my effects on an aux and set up an aux send on my vocal channel to the bus i set up on the input of the aux channel, right?

    I'm being dumb, i know hehe...but it's been a week without much sleep and I normally don't record bands anymore...i work post music inside the box.

Share This Page