1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

PT Bounce Problems

Discussion in 'Recording' started by UnboundAudio, Feb 21, 2005.

  1. UnboundAudio

    UnboundAudio Guest

    After bouncing a file out of PT I tried playing it back through WinAmp, iTunes and Encore. Through any source besides Pro Tools, the sounds is played back fast. I've tried different sample rats and formats, but after it's bounced, it always plays back fast.

    Any suggestions?

    Thanks,
    Aaron
     
  2. Dave62

    Dave62 Guest

    Are you using any external digital clocks?? Digimax LT etc.. You may have a digital clock problem. If you have any external clocks feeding PT you can be misled by your session data. For instance if you create a 48 khz session set to an external clock but accidently feed it 44.1 k it will say its a 48 session but it is actually at 44.1khz. So at this point it sounds fine in protools but a bounce and convert to CD will result in your material playing back to fast. If you reset to the internal PT clock it will probably speed up in Protools too. To get out of your current problem just mix with current settings digitally to a 44.1 dat and then re-import the converted mix digitally to burn your CDs. If digital won't work use analog. Good Luck!
     
  3. pmolsonmus

    pmolsonmus Well-Known Member

    Hi,

    There is a guy on the Digi User Conf (DUC) that has a website with free apps for working with PT. It sounds like you may need one that he has that changes the headings without changing the files.

    The app is called Header Investigator
    and can be found at


    www.railjonrogut.com
     

Share This Page