1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

PT with other hardware?

Discussion in 'Recording' started by imloggedin, May 23, 2005.

  1. imloggedin

    imloggedin Guest

    if i had pro tools and an mbox, could i use other hardware with it also, like an adat card that i already have?
     
  2. jonnyc

    jonnyc Member

    I'm pretty sure that only digidesign and m-audio hardware can be used with pt.
     
  3. Dave62

    Dave62 Guest

    If you were to get a 001 or 002 you can hook up an extra 8 ins and outs optically. So an old adat tape machine in record ready can give you an extra 8 inputs, as well there are a lot of optically connected i/o's out there i.e. Alesis AI-3, Digimax LT, Rosetta 800, Octapre, etc. that will all connect optically to the 001 or 002 line via the adat ports.
     

Share This Page