1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Question about older ProTools Digi 001 setup

Discussion in 'Pro Tools' started by JLiRD808, Dec 21, 2006.

  1. JLiRD808

    JLiRD808 Active Member

    I found this on craigslist:

    http://honolulu.craigslist.org/oah/msg/237917593.html

    It's pretty old I guess and after reading the specs I noticed that it doesn't even mention Windows XP. Will I even be able to install it? Do they even sell the upgrades from these earlier versions?

    Is this even a good deal?

    Thanks!
     
  2. JLiRD808

    JLiRD808 Active Member

    So I figured out I could upgrade to a Digi 002. Anyone know if I can crossgrade to an MBox 2? That's really all I need.
     
  3. Auxsam

    Auxsam Guest

    I run a digi 001 on windows xp in one studio and i run a digi 002R in a mac based studio. obviously the digi 002 is newer, but would you believe it if i told you that its flakier than its much older predecessor? i blieve the Pci card in a digi 001 is much more reliable. I've got pro tools 6.7 on both. on the other hand, very little support left for th 001 so you will eventually have to change to a 002. I would never trade my 001 for an mbox, the input capacity alone is worth it.
    A.
     
  4. gdoubleyou

    gdoubleyou Well-Known Member

    Digidesign usually has time limited upgrade offers. Also you would be frozen at version 6.7 I believe.

    8)
     
  5. Kev

    Kev Well-Known Member

    I think 001 in XP is frozen at 6.4
     

Share This Page