1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Question on routing of Big Ben, Interface w/ FX Processors

Discussion in 'Recording' started by spicoli, Apr 26, 2006.

  1. spicoli

    spicoli Guest

    I currently have a Big Ben master clock routing to my RME FF800.

    My FX Processors dont have a dedicated WC input, so I assume I need to run my S/PDIF to my soundcard. However, is it critical that the soundcard would be a slave clock (from the Big Ben) or does it have to be a master?

    Can I route the Big Ben to the FX processors directly via an optical channel just for clock purposes?

    I should know this...
     

Share This Page