1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

recording help!!

Discussion in 'Recording' started by everstormz, Jan 5, 2010.

  1. everstormz

    everstormz Guest

    [youtube]Hello, If someone can help me with this i would be very grateful. I am using logic 9 and mbox 2 interface. when i record an audio track with my guitar i keep hearing a clicking sound between audio tracks. an example would be: i record for two measures and when i finish the recording and i copy and paste there is always a clicking at the beginning of the track and the ones i repeated. i levels seem to be not clipping. someone please help.[/youtube]
     
  2. natural

    natural Active Member

    This is a common problem.
    Your lesson for today is to look up crossfades in the manual.
    Another tip would be to chop off a tiny piece of audio from the back of the first bit of audio and the front of the next bit of audio. Zoom in down to the sample level and make sure that your edit is at the 0 line. (the horizontal line in the middle)
    This along with crossfading should reduce you cliks.
     
  3. everstormz

    everstormz Guest

    I will try and look into this, thank you Anthony
     
  4. dvdhawk

    dvdhawk Well-Known Member

    We had the same question a little over a month ago:

    This should help.
     
  5. everstormz

    everstormz Guest

    I used the cross-fades and it resolved my problems, thank you both again!
     

Share This Page