1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Request Help: Symetrix TI-101 Phone Patch integration/usage

Discussion in 'Pro Audio Equipment' started by JoeW, Feb 20, 2005.

  1. JoeW

    JoeW Guest

    Hope I am posting this in the correct forum...

    I'm trying to get a Symetrix TI-101 phone patch working. My biggest problem...

    I use a line splitter to take the phone line into the Symetrix. The other side of the splitter goes to the telephone. To open the phone line, I have to take the handset off the telephone base.

    The problem is that the telephone handset also pics up the sound being routed through the Symetrix and mixer.

    There must be an easy solution to this, but I sure can't figure it out.

    Thanks for any help!
  2. AudioGaff

    AudioGaff Well-Known Member

    Not sure I quite understand, but if your picking up unwanted sound through the phone it's self, then disconnect the handset from the base or disconnect the mic or cover the mic, (the part you speak into) with a folded wash cloth and a rubber band and then set it face down away from the source.

Share This Page