1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Research and Developement

Discussion in 'Pro Audio Equipment' started by Sebatron, May 11, 2006.

  1. Sebatron

    Sebatron Well-Known Member

    This will be intergrated into our new mobile recording facility.

    All conversion will be done at 192Khz.

    http://www.youtube.com/watch?v=lY__e391IRY&search=robot technology

    8)
     
  2. MadGuitrst

    MadGuitrst Active Member

    Every studio should have at least one of those.
    Using an anechoic chamber, ours created bass so low it pulverized the glass eye of our recording engineer and caused the excecutive producer's pacemaker to become dislodged.

    Of course, we recorded at 384.785k, which we expect to become a studio standard by no later than the beginning of 2047 AD or 134 BCjr, whichever comes first. At a mere 192k, I doubt it could even crack the engineer's other eye, let alone turn it to sand.

    Anyhow, thanks for sharing, we are all better for it. :shock:
     
  3. Markd102

    Markd102 Well-Known Member

    impressive piece of equipment.


    On the subject of R&D Seb, is there any more news on that compressor we were talking about a while back?
     
  4. Sebatron

    Sebatron Well-Known Member

    It's getting closer. All of the core circuits have been sussed out.
    We have some final testing to complete.
    The compressor itself may be issued in a 1U version then followed up with a more detailed 2U version with VU.

    8)
     
  5. MadGuitrst

    MadGuitrst Active Member

    I must have missed something.
    All I saw was a robot walking funny.
    ????? :shock: :oops:
     

Share This Page