1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

S-760 sampler

Discussion in 'Recording' started by lucid, Aug 10, 2001.

  1. lucid

    lucid Guest

    can anybody PLEASE tell me how control filter & resonance with midi using CC data? i think i'm missing one small step somewhere.

    anybody have a op760-1 card to get rid of? didn't think so.

    thanks
     
  2. pan

    pan Guest

    It took me a hell of time to get used to the "patch control" window, there you can assign some controllers to specific sources. But you also have to set some parameters in the partial(s) you want to modulate - i.e. you need to set an envelope (flat if you don't use it) to the filter with a medium value.

    Hope this was comprehensive, Niko
     
  3. Curve Dominant

    Curve Dominant Active Member

    Thanks for fielding that one, Pan. I wasn't sure what the deal was myself.

    E
     
  4. lucid

    lucid Guest

    :) :) :) :) :) :)

    you da man, pan!

    i've been trying to get that for some time now, with little help from the cryptic manual.

    for those who want to know-

    under patch control:
    SMT C. Select - ctrl
    Ctrl Select - 21 (CC#)
    TVF (ctrl) - 63 (max)

    in perf play page 5:
    C. offset - -63

    i think thats all i did anyway.

    thanks pan!
     
  5. pan

    pan Guest

    this SMT-thing is for switching samples in the partial, is it?
    Someone can explain the SMT?

    Niko :confused:
     

Share This Page