Selecting a good patchbay

Discussion in 'Patchbays' started by dabmeister music, Aug 25, 2003.

  1. dabmeister music

    dabmeister music Active Member

    The way I see things is , if quality can be determinded through your wiring/cables , then should'nt this pertain to patchbays? I'm looking for a good patchbay. Then again , a couple of good patchbays. Does anyone know of or can give a good recomindation as to what's widely use now-a-days? The only one I can recall is "Neutrik".
     
  2. Recording Engineer

    Recording Engineer Active Member

    Well, there is Mosses & Mitchell at $500 and up a pop... Too much for my blood when in need of more than 2-4. ADC is a good choice, but after dealing with them in trying to buy a cable support bar for one of their curently manufactured patchbays that they wouldn't sell me by itself, I settled on Switchcraft.
     
  3. AudioGaff

    AudioGaff Well-Known Member

    Patchbay for what? 1/4" TS or TRS, TT, XLR, MIDI

    For 1/4" TS or TRS in the affordable range, they all seemed to be about the same to me. I went with the dbx for home use as I got four new ones in trade for some work I did a few years ago. So far they are holding up ok.
     
  4. white swan

    white swan Guest

    try http://www.patchbays.com
     

Share This Page